Though SunRock Solar is based in Blue Ash, Ohio–a suburb north of Cincinnati–we design and install renewable energy systems throughout southwest Ohio. We have completed projects in Oxford, Eaton, Tipp City, Kettering, Waynesville, and Yellow Springs. If you live in the greater Dayton area and are interested in learning more about solar for your home or business, give us a call. A few examples of our work in the greater Dayton area are described below.
SunRock has performed several installations in Yellow Springs, including one this past year at the Dann-Denny residence (featured in this Yellow Springs News article). The 5.2 kW solar PV installation was designed to provide about 80% of the couple’s modest electricity needs. At ages 94 and 79, the couple was particularly interested in leaving a legacy for the future.
SunRock installed a solar power system on the roof of a home in Kettering back in 2010 (photo here). In 2011, the roof was severely damaged in a hail storm and had to be replaced. SunRock removed the PV modules (which were NOT damaged by the hail) to allow a new roof to be put on, and then reinstalled the panels. The system is back in production and producing electricity for the homeowner.
A large farm and residence in Eaton was built with solar back in 2008. After several years on the property, the owners decided more energy was needed to meet the needs of the farm. In 2012, SunRock increased the capacity of the ground-mounted system to 31 kW (photo here). The owners are now considering the addition of a third solar power system to cover the electricity for a recreational cabin and pond aeration pumps.
In 2011, customers in Tipp City were interested in solar electric for their home, but didn’t want anything on the front roof of their south-facing house. So SunRock installed a pole-mounted system in the backyard (). This pole-mounted system has the added benefit of being seasonally adjustable to match the changing angle of the sun. The solar PV system has provided 91% of their electricity in the last 12 months.
The long days of summer are here and solar production is at its peak for Cincinnati. We have plenty of sunshine here in the summer, but many people ask us if we get enough sun during the rest of the year to make solar projects feasible? The answer is, absolutely! With thousands of solar power systems installed in southwest Ohio, there is no doubt solar works here. The table below shows the percent of our annual sunshine we receive each month of the year.
Obviously our best sun conditions occur from March thru October, but even those cloudy months of winter provide some good solar days.
The sun’s angle above the horizon peaks on June 20, the summer solstice, and reaches its minimum angle on December 20, the winter solstice.
How does this play into the best orientation of solar panels? Ideally when the sun is perpendicular to the surface of solar panels, the panels receive optimum sun and thus produce optimum power. So to maximize production at the summer solstice, we tilt our solar panels at 26 degrees so the panel is at a right angle to the sun (26 + 74 = 90 degrees). This would make production optimum for one day of the year, and suboptimum for the rest of the year.
But solar is forgiving and solar power systems which don’t have optimal siting still produce lots of solar power! There is a large “solar sweet spot” such that, even if the tilt and orientation of the panels towards south is not perfect, we take a relatively small performance hit.
What happens in practice is typically one of three things:
- We mount the solar panels flush with the roof of the home.
- We mount the solar panels on a fixed tilt mounting system on the ground.
- We mount the solar panels on a variable tilt mounting system.
In the end, if the modules do not face true south and are not tilted at just the right angle, solar still works and we still produce power.
Let’s discuss the three options above.
We mount the solar panels flush with the roof of the home. This configuration provides the best aesthetics and lowest installed cost for most residential systems. Typical roof angles are 18 – 45 degrees in the Cincinnati area, the most common being 18 – 26.6. The systems perform well and the neighbors don’t think a space ship has landed on your roof.
We mount the solar panels on a fixed tilt mounting system on the ground. This approach is often taken when there is available ground real estate and building roof structure or orientation is not conducive to a solar installation. Here is a solar carport constructed for a client in Cincinnati. The home has a large south facing roof, but it is encumbered by a large dormer and two large chimneys. The carport array tilts at 15 degrees as a trade off to maximize solar production and minimize wind loading on the structure. The array is producing 100% of the electrical needs of the home. At this local farm we had plenty of real estate and freedom to line up the array to face true south with a tilt of 30 degrees (optimum for Cincinnati). In general, ground mounted structures will be more expensive than roof mounted systems due to the cost of building the mounting system.
We mount the solar panels on a variable tilt mounting system. This allows the tilt angle of the modules to be adjusted (typically monthly) to follow the sun’s seasonal elevation changes. This approach adds some cost due to the increased complexity of the structure, but the benefits are many. It is easy to mow and trim around the structure, solar production is maximized, and less real estate is needed for the array. SunRock Solar installed a seasonally adjustable pole mounted array in Reading, Ohio. This site is interesting as it has some late afternoon shade so the array was oriented to face slightly south east rather than true south. This actually improved the system performance by approximately 5% over a true south facing array.
To wrap up, there are many factors which contribute to the performance and aesthetics of solar power systems. Each situation is different. By taking the time to analyze and discuss options with its customers, SunRock Solar can deliver a power system which melds aesthetic and performance expectations, with the reality of site conditions. Solar works well in Cincinnati!
SunRock has recently installed two more commercial systems. A 51 kW direct tied photovoltaic array was installed on the roof of the locomotive shop at the CSX rail yar in downtown Cincinnati. The system at CSX allows the company to take advantage of financial incentives and offset power purchase from the local utility.
For more information about financial incentives available in the state of Ohio, click here.
Grabill Heating and Plumbing decided to install a photovoltaic system to offset the electrical costs associated with running its business. It was a two-phase process with the first panels installed in 2011. It is a 19 kW direct tied PV array. The solar panels mounted on the showroom and warehouse and now produce 95% of Grabill’s electrical needs.
To see photos of other commercial installations completed by SunRock Solar, click here.
Are you wondering if a solar installation is right for your business? Call SunRock Solar at (513) 766-6025 to discuss available financial incentives and how they can make solar affordable for you!
Harvey P. of Yellow Springs Ohio hired SunRock Solar to install a photovoltaic array in his backyard using a seasonally adjustable pole mount system. The installation was completed on May 3, 2011, so the system has been in production for about a year. We interviewed Harvey about his panels and the pole mount system.
How big is your system?
Fifteen 230-watt modules for a system rating of 3.45 kW.
What percentage of your utility is being covered? How much have your utility bills gone down?
I am covering 100% of usage, but we were not big users. Our electric bill is now $10.00 per month, covering the first 100 kWh, which I never use.
Now that it has been running for awhile, have you figured out how long it will take to pay it off?
Very uncertain, as it depends on electricity rates, SREC values, and the value of my power uses (e.g. the use of solar to power my plug-in Prius displaces gasoline charges)
How many SRECs have you produced?
Slightly less than 4 MWh at this point.
You decided to use a pole mount system. Why didn’t you put the panels on your roof?
More shading from neighbors trees than was the case with the pole mount.
Why didn’t you use a regular ground mount system?
I wanted the option of “following” the sun during the seasons, and also the pole mount left more gardening space than a ground mount would have.
Do you think the pole mount system has helped your production?
Yes, based on a comparison with a roof-mount array located nearby. The steep winter tilt also helps prevent snow build up on the panels.
Are you satisfied with the production? Yes.
Is the tilt mechanism easy to adjust? Yes, very easy.
How often do you need to adjust it?
I usually change the setting twice a month, and sometimes more often if I am showing the installation to someone.
Have any issues or problems developed? No.
Have you had any major storms hit your area? Hail, or high winds?
There has been some small hail and fairly high winds. The hail caused no visible damage and the wind caused the array to shake a bit, but not enough to cause worry or damage.
Are you satisfied with the work that was performed? Very much.
What other things do you do at your house to reduce your energy costs?
We have new appliances, all energy star, and most of our lighting is with CFLs. We are replacing our windows to decrease air conditioning load, the only possible use that would exceed our production enough to use our “banked” production.
Are the panels producing enough energy to handle your house and charge up your electric car?
We have a plug-in Prius, and easily have the capacity to cover it. (about 4 kWh for a full charge. It is not used every day.)
Do you monitor your usage more now that you have panels installed? Has it made you more aware of what you are using?
No, I have kept a spreadsheet of usage for several years. But I do enjoy following the solar production using the online monitoring.
Are you glad that you had solar panels installed at your house?
The following data has been collected from current SunRock Solar customers to show what each has made by selling their SRECs produced by their installed systems.
We were able to collect information from 13 out of 21 of our residential PV customers. Four systems are still waiting for state certification, and data is not available for the others at this time.
It does not reflect the SRECs that our commercial customers have sold, nor does it reflect those that have contracts for their solar hot water systems. Contracts are no longer available for SHW customers.
The SolSytems customers have all signed contracts so they have received the same amount for each SREC. SREC prices range from $200.00 to $303.00.
The SRECTrade customers put their SRECs up for auction when they are produced and their sale prices vary. SREC prices range from $265.05 to $372.93.
Customer 8 puts their SRECs for sale on the GATS billboard and companies deal directly with them to buy the SRECs. These SREC prices range from $325.00 to $385.00, which is the most anyone has received.
Data was collected through the end of February 2012.
||Array size -KW
||Total SRECs sold
||Average Price /SREC
||Total $ from SRECs
*Customer 8 has produced four additional SRECs but has not put them up for auction yet.